Dr. Sumon Saha
PhD (Australia), M.Sc. Engg. (BUET), B.Sc. Engg. (BUET)

Associate Professor

Department of Mechanical Engineering, BUET

 Research Field

Turbulent Flow

Computational Fluid Dynamics (CFD)

Computational Heat Transfer (CHT)

 Courses Offered

Theory Courses

ME 169 Basic Thermal Engineering

ME 245 Engineering Mechanics and Theory of Machines

ME 267 Mechanical Engineering Fundamentals

ME 303 Convection, Boiling, Condensation and Mass Transfer

ME 305 Heat Transfer

ME 415 Refrigeration and Building Mechanical System

ME 461 Control Engineering

ME 475 Mechatronics

ME 6401 Advanced Mechatronics

ME 6145 Advanced Convection Heat Transfer

Laboratory Courses

ME 160 (Mechanical Engineering Drawing-I)

ME 170 (Basic Thermal Engineering Sessional)

ME 172 (Computer Programming Language Sessional)

ME 202 (Basic Thermodynamics Sessional)

ME 244 (Mechanics of Solid Sessional)

ME 260 (Mechanical Engineering Drawing-II)

ME 262 (Numerical Analysis Sessional)

ME 266 (Thermal Engineering and Heat Transfer Sessional)

ME 268 (Mechanical Engineering Fundamentals Sessional)

ME 302 (Heat Transfer Sessional)

ME 304 (Heat and Mass Transfer Sessional)

ME 344 (Machine Design Sessional-II)

ME 362 (Instrumentation and Measurement Sessional)

 List of Journal Publications (Total Published: 54)

  1. Saha, S., Klewicki, J.C., Ooi, A. & Blackburn, H.M., On scaling pipe flows with sinusoidal transversely corrugated walls: analysis of data from the laminar to the low-Reynolds-number turbulent regime, Journal of Fluid Mechanics, 779 (2015), pp. 245-274.
  2. Mojumder, S., Saha, S., Saha, S. & Mamun, M. A. H., Combined effect of Reynolds and Grashof numbers on mixed convection in a lid-driven T-shaped cavity filled with water-Al2O3 nanofluid, Journal of Hydrodynamics, Ser. B, 27(5) (2015), pp. 782-794.
  3. Mojumder, S., Saha, S., Saha, S. & Mamun, M. A. H., Effect of magnetic field on natural convection in a C-shaped cavity filled with ferrofluid, Procedia Engineering, 105 (2015), pp. 96-104.
  4. Hasib, M. H., Hossen, M. S. & Saha, S., Effect of tilt angle on pure mixed convection flow in trapezoidal cavities filled with water-Al2O3 nanofluid, Procedia Engineering, 105 (2015), pp. 388-397.
  5. Hasan, M. N., Samiuzzaman, K., Haque, S. H., Saha, S., & Islam, M. Q., Mixed convection heat transfer inside a square cavity filled with Cu-water nanofluid, Procedia Engineering, 105 (2015), pp. 438-445.
  6. Waliullah, M., Hossain, M. Z. & Saha, S., On the implementation of two-diode model for photovoltaic-thermal systems, Procedia Engineering, 105 (2015), pp. 725-732.
  7. Saha, S., Klewicki, J.C., Ooi, A.S.H. & Blackburn, H.M., Comparison of thermal scaling properties between turbulent pipe and channel flows via DNS, International Journal of Thermal Science, 89 (2015), pp. 43-57.
  8. Saha, S., Ooi, A.S.H. & Blackburn, H.M., Validation criteria for DNS of turbulent heat transfer in pipe flow. Procedia Engineering, 90 (2014), pp. 599-604.
  9. Rahman, R., Hossain, B., Saha, S. & Islam, M. Q., Energy Consumption Pattern in Rural Areas of Bangladesh and its Future Development. International Journal of Wind and Renewable Energy, 3(2) (2014), pp. 20-25.
  10. Saha, S., Klewicki, J.C., Ooi, A.S.H., Blackburn, H.M. & T. Wei, Scaling properties of the equation for passive scalar transport in wall-bounded turbulent flows, International Journal of Heat and Mass Transfer, 70 (2014), pp. 779-792.
  11. Hussein, A. K., Saha, S., & Khan, W. A., Numerical Study of Natural Convection around an Adiabatic Circular Cylinder Located Inside a Square Open Cavity. Journal of Basic and Applied Scientific Research, 3(11) (2013), pp. 189-200.
  12. Hussein, A. K., Hussein, S. H., Saha, S., Saha, G., & Hasanuzzaman, M., Effects of a Longitudinal Magnetic Field and Discrete Isoflux Heat Source Size on Natural Convection inside a Tilted Sinusoidal Corrugated Enclosure. Journal of Basic and Applied Scientific Research, 3(10) (2013), pp. 402-415.
  13. Hussein, A. K., Ahmed, S. E., Saha, S., Hasanpour, A., Mohammed, H. A., Kolsi, L., & Adegun, I. K., MHD natural convection inside an inclined trapezoidal porous enclosure with internal heat generation or absorption subjected to isoflux heating. Heat Transfer-Asian Research, 41(6) (2012), pp. 498-515.
  14. Saha, S., Hussein, A. K., Khan, W. A., Mohammed, H. A., Pakdee, W., & Hasanpour, A., Effects of diameter ratio of adiabatic circular cylinder and tilt angle on natural convection from a square open tilted cavity. Heat Transfer-Asian Research, 41(5) (2012), pp. 388-401.
  15. Hasan, M. N., Saha, S., & Saha, S. C., Effects of corrugation frequency and aspect ratio on natural convection within an enclosure having sinusoidal corrugation over a heated top surface. International Communications in Heat and Mass Transfer, 39(3) (2012), pp. 368-377.
  16. Saha, S., Chin, C., Blackburn, H.M., & Ooi, A.S.H., Effect of computational pipe length on thermal statistics from DNS of turbulent heat transfer, International Journal of Heat and Fluid Flow, 32(6) (2011), pp. 1083-1097.
  17. Saha, S., Hussein, A.K., Saha, G., & Hussain, S.H., Mixed convection in a tilted lid-driven square enclosure with adiabatic cylinder at the center, Heat and Technology, 29(1) (2011), pp. 143-156.
  18. Rahman, M. M., Rahim, N. A., Saha, S., Billah, M. M., Saidur, R., & Ahsan, A., Optimization of mixed convection in a lid-driven enclosure with a heat generating circular body. Numerical Heat Transfer, Part A: Applications, 60(7) (2011), pp. 629-650.
  19. Saha, S., Saha, G., Islam, M. Q. & Raju, M. C., Mixed convection inside a lid-driven parallelogram cavity with isoflux heating from below, i-manager's Journal on Future Engineering & Technology. 6 (2010), pp. 14-22.
  20. Saha, G., Sultana, T. & Saha, S., Effect of thermal radiation and heat generation on MHD flow past a uniformly heated vertical plate, Desalination and Water Treatment. 16(1-3) (2010), pp. 57-65.
  21. Rahman, M. M., Alim, M. A., & Saha, S., Mixed convection in a square cavity with a heat- conducting horizontal square cylinder, Suranaree Journal of Science and Technology. 17(2) (2010), pp. 139-153.
  22. Saha, G., Saha, S., Hasan, M. N., & Islam, M. Q., Natural convection heat transfer within octagonal enclosure, International Journal of Engineering Transactions A: Basics. 23(1) (2010), pp. 1-10.
  23. Saha, S., Saha, G., Islam, M. Q., & Raju, M. C., Convective heat transfer inside an enclosure with double discrete heaters and exit configurations, Karpagam International Journal of Applied Mathematics. 1(1) (2010), pp. 85-90.
  24. Rahman, M. M., Alim, M. A., Saha, S., & Chowdhury, M. K., Effect of the presence of a heat conducting horizontal square block on mixed convection inside a vented square cavity, Nonlinear Analysis: Modelling and Control. 14(4) (2009), pp. 531-548.
  25. Islam, M. T., Saha, S., Ali, M., Islam, M. Q., & Saha, G., Mixed convection heat transfer characteristics in a channel with an open enclosure, Journal of Energy, Heat and Mass Transfer. 31(2009), pp. 73-89.
  26. Saha, S., & Ali, A. R. M., Thermal buckling and postbuckling characteristics of extensional slender elastic rods, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. ME40(1) (2009), pp. 1-8.
  27. Saha, S., Hasan, M. N., & Khan, I. A., Double diffusive mixed convection heat transfer inside a vented square cavity, Chemical Engineering Research Bulletin. 13(1) (2009), pp. 17-24.
  28. Sultana, T., Saha, S., Rahman, M. M., & Saha, G., Heat transfer in a porous medium over a stretching surface with internal heat generation and suction or injection in the presence of radiation, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. ME40(1) (2009), pp. 22-28.
  29. Saha, S., Islam, M. Q., & Saha, G., Mixed convection in a vee-corrugated enclosure with isoflux heating from below, The AUST Journal of Science and Technology. 1(1) (2008), pp. 84-96.
  30. Islam, M. Q., Ali, M., & Saha, S., Low cost high solidity horizontal axis wind turbine for irrigation in Bangladesh, Journal of Energy, Heat and Mass Transfer. 30(2) (2008), pp. 183-192.
  31. Banu, S., Saha, G., & Saha, S., Multisegment integration technique for post-buckling analysis of a pinned-fixed slender elastic rod, Brac University Journal, Bangladesh. V(2) (2008), pp. 1-7.
  32. Islam, M. T., Saha, S., Mamun, M. A. H., & Ali, M., Two dimensional numerical simulation of mixed convection in a rectangular open enclosure, Fluid Dynamics and Materials Processing. 4(2) (2008), pp. 125-138.
  33. Rahman, M. M., Alim, M. A., & Saha, S., A numerical study of mixed convection in a square cavity with a heat conducting square cylinder at different locations, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. ME39(2) (2008), pp. 78-85.
  34. Rahman, M. M., Alim, M. A., Saha, S., & Chowdhury, M. K., Mixed convection in a vented square cavity with a heat conducting horizontal solid circular cylinder, Journal of Naval Architecture and Marine Engineering. 5(2) (2008), pp. 37-46.
  35. Islam, M. T., Saha, S., Saha, G., Rahman, M. M., Mamun, M. A. H., & Islam, M. Q., Numerical simulation on mixed convection in a parallelogrammic ventilated enclosure, Ganit, J. Bangladesh Math. Society. 28 (2008), pp. 45-58.
  36. Saha, S., Hasan, N., & Feroz, C. M., Natural convection in a differentially heated enclosure with triangular roof, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. ME39(1) (2008), pp. 1-7.
  37. Raju, M. C., Varma, S. V. K., Reddy, P. V., & Saha, S., Soret effects due to natural convection between heated inclined plates with magnetic field, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. ME39(2) (2008), pp. 65-70.
  38. Saha, S., Sultana, T., Saha, G., & Rahman, M. M., Effects of discrete isoflux heat source size and angle of inclination on natural convection heat transfer flow inside a sinusoidal corrugated enclosure, International Communications in Heat and Mass Transfer. 35(10) (2008), pp. 1288-1296.
  39. Sultana, T., Saha, S., Saha, G., & Islam, M. Q., Natural convection in tilted square cavities with triangular shaped top cold wall, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. ME39(1) (2008), pp. 30-39.
  40. Uddin, H., & Saha, S., Study of natural convection flows in a tilted trapezoidal enclosure with isoflux heating from below, Suranaree Journal of Science and Technology. 15(4) (2008), pp. 293-306.
  41. Saha, S., Saha, G., & Islam, M. Q., Finite element analysis of natural convection in a differentially heated square cavity, Bangladesh Journal of Physics, A Journal of Bangladesh Physical Society. 5 & 6 (2008), pp. 47-57.
  42. Saha, S., Saha, G., & Islam, M. Q., Natural convection in square enclosure with adiabatic cylinder at center and discrete bottom heating, Daffodil International University Journal of Science and Technology. 3(1) (2008), pp. 29-36.
  43. Saha, S., Mamun, M. A. H., Hossain, M. Z., & Islam, A. K. M. S., Mixed convection in an enclosure with different inlet and exit configurations, Journal of Applied Fluid Mechanics. 1(1) (2008), pp. 78-93.
  44. Hossain, M. K. M., Islam, M. Q., Mandal, A. C., & Saha, S., Wind effect on staggered cylinders of square and rectangular sections with variable longitudinal spacings, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. ME38 (2007), pp. 52-57.
  45. Islam, M. T., Saha, S., Mamun, M. A. H., & Saha, G., Natural convection in an inclined square enclosure containing internal energy sources, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. ME37 (2007), pp. 24-32.
  46. Saha, G., Islam, M. T., Saha, S., & Islam, M. Q., Natural convection in titled isosceles triangular enclosure with discrete bottom heating, Thammasat International Journal of Science and Technology. 12(4) (2007), pp. 24-35.
  47. Saha, G., Saha, S., Ali, M., & Islam, M. Q., Natural convection in a vee-corrugated square enclosure with discrete heating from below, Journal of Engineering and Technology. 6(1) (2007), pp. 15-27.
  48. Saha, G., Saha, S., & Islam, M. Q., Natural convection in a modified square enclosure with constant flux heating from left, AIUB Journal of Science and Engineering. 6(1) (2007), pp. 89-96.
  49. Saha, G., Saha, S., Islam, M. Q., & Akhanda, M. A. R., Natural convection in enclosure with discrete isothermal heating from below, Journal of Naval Architecture and Marine Engineering. 4(1) (2007), pp. 1-13.
  50. Saha, G., Saha, S., & Mamun, M. A. H., A finite element method for steady-state natural convection in a square tilt open cavity, ARPN Journal of Engineering and Applied Sciences. 2(2) (2007), pp. 41-49.
  51. Saha, S., Islam, M. T., Ali, M., Mamun, M. A. H., & Islam, M. Q., Effect of inlet and outlet locations on transverse mixed convection inside a vented enclosure, Journal of Mechanical Engineering, The Institution of Engineers, Bangladesh. ME36 (2006), pp. 27-37.
  52. Saha, S., Islam, M. T., & Hossain, M. Z., Design of a low cost multi channel data logger, ARPN Journal of Engineering and Applied Sciences. 1(1) (2006), pp. 26-32.
  53. Saha, S., Saha, G., Ali, M., & Islam, M. Q., Combined free and forced convection inside a two-dimensional multiple ventilated rectangular enclosure, ARPN Journal of Engineering and Applied Sciences. 1(3) (2006), pp. 23-35.
  54. Saha, S., Sultana, T., Saha, G., & Islam, M. Q., Natural convection inside a vee corrugated enclosure: effect of inclination angle and discrete heat source size, Journal of Institution of Engineers, Bangladesh (Multidisciplinary). 31(1) (2006), pp. 85-99.

 

 

 

 

 List of Conferences (Total Published: 42)

  1. Mohammed, N., Hossain, M. Z. & Saha, S., Development of automatic blood pressure measuring device using oscillometric algorithm, Proceedings of 7th International Mechanical Engineering Conference and 16th Annual Paper Meet, Paper No. IE-20, IEB, Dhaka, Bangladesh, January 02, 2015.
  2. Islam, S., Jaman, M. S., Mojumder, S. & Saha, S., Effect of Richardson number on aiding mixed convection inside a lid-driven differentially heated square cavity, Proceedings of 7th International Mechanical Engineering Conference and 16th Annual Paper Meet, Paper No. HT-08, IEB, Dhaka, Bangladesh, January 02, 2015.
  3. Paul, G. & Saha, S., Large-scale features in turbulent heat transfer of wavy-wall pipe flow, Proceedings of 7th International Mechanical Engineering Conference and 16th Annual Paper Meet, Paper No. HT-02, IEB, Dhaka, Bangladesh, January 02, 2015.
  4. Hasanuzzaman, M., Azam, M., Saha, S. & Saha, S., Influence of Richardson number on mixed convection inside a T-shaped open cavity subjected to Couette flow, Proceedings of 7th International Mechanical Engineering Conference and 16th Annual Paper Meet, Paper No. HT-01, IEB, Dhaka, Bangladesh, January 02, 2015.
  5. Mohammed, N., Saha, S., & Hossain, M. Z., Development of an algorithm to calculate heart rate from the blood pressure data obtained using oscillometric algorithm, Proceedings of 4th International Conference on Chemical Engineering 2014, Paper No. ICChE14166, Dhaka, Bangladesh, December 29 - 30, 2014.
  6. Hasan, M. N., Samiuzzaman, K., Shavik, S. M., Saha, S., & Islam, M. Q., Natural convection inside a nanofluid filled square enclosure in presence of an external transverse magnetic field, Proceedings of 6th BSME International Conference on Thermal Engineering, Paper No. 225, Dhaka, Bangladesh, December 19 - 21, 2014.
  7. Saha, S., Hossen, S., Hasib, M. H. & Saha, S. C., Onset of laminar-turbulent transition in mixed convection of a lid-driven trapezoidal  enclosure filled with water-Al2O3  nanofluid. Proceedings of 19th Australasian Fluid Mechanics Conference, Paper No. 177, RMIT University, Melbourne, Australia, December 8-11, 2014.
  8. Saha, S., Klewicki, J. C., Ooi, A. S. H. and Blackburn, H. M., A comparison of meso-scaled heat flux and temperature in fully-developed turbulent pipe and channel flows. Proceedings of 18th Australasian Fluid Mechanics Conference, Paper No. 109, Launceston, Tasmania, Australia, December 3-7, 2012.
  9. Saha, S., Klewicki, J. C., Ooi, A. S. H. and Blackburn, H., On the establishment of a logarithmic mean temperature profile in fully developed turbulent pipe flow with constant surface heat flux, Proceedings of the Seventh International Symposium on Turbulence, Heat and Mass Transfer, Paper No. 051, Palermo, Italy, September 24-27, 2012.
  10. Saha, S., Ooi, A. and Blackburn, H. M., Heat transfer enhancement through wavy pipe, Proceedings of 9th Australasian Heat and Mass Transfer Conference, Paper No. 0006, Monash University, Victoria, Australia, November 2-4, 2011.
  11. Saha, S., Hasan, M. N., Saha, G. and Islam, M. Q., Effect of inclination angle on mixed convection in a lid-driven square enclosure with internal heat generation or absorption, Proceedings of International Conference on Mechanical, Industrial and Energy Engineering, Paper No. ME10-149, Khulna, Bangladesh, December 23-24, 2010.
  12. Hasan, M. N., Saha, S., Saha, G. and Islam, M. Q., Effect of sidewall inclination angle of a lid-driven trapezoidal enclosure on mixed convective flow and heat transfer characteristics, Proceedings of the 13th Asian Congress of Fluid Mechanics, Paper No. 86, Dhaka, Bangladesh, December 17-21, 2010.
  13. Hasan, A. B. M. T., Saha, S., Alam, T., Hasan, N., Mamun, M. A. H. and Islam, A. K. M. S., A numerical study on the physiologically realistic pulsatile flow through an eccentric arterial stenosis, Proceedings of 17th Australasian Fluid Mechanics Conference, Paper No. 157, Auckland, New Zealand, December 5-9, 2010.
  14. Saha, S., Chin, C. C., Blackburn, H. M. and Ooi, A., Numerical study of heat transfer in a fully developed turbulent pipe flow, Proceedings of 17th Australasian Fluid Mechanics Conference, Paper No. 131, Auckland, New Zealand, December 5-9, 2010.
  15. Saha, S., Saha, G. and Hasan, N., Mixed convection in a lid-driven cavity with internal heat source, Proceedings of the 13th Annual Paper Meet, Paper No. MED-43, IEB, Dhaka, Bangladesh, September 25, 2010.
  16. Hasan, M. N., Hasan, N., Islam, M. Q., Saha, S. and Saha, G., Effect of internal heat generation or absorption on mixed convection characteristics in a tilted lid-driven square enclosure, Proceedings of the 13th Annual Paper Meet, Paper No. MED-07, IEB, Dhaka, Bangladesh, September 25, 2010.
  17. Hossain, M. N., Saha, S. and Mamun, M. A. H., Mixed convection analysis in a lid driven trapezoidal cavity with isothermal heating at bottom for various aspect angles, Proceedings of 8th International Conference on Mechanical Engineering, Paper No. ICME09-TH-10, BUET, Dhaka, Bangladesh, December 26-28, 2009.
  18. Hossain, M. N., Mamun, M. A. H. and Saha, S., Mixed convection in a trapezoidal cavity with moving lid at top wall and heating from below, Proceedings of International Conference on Chemical Engineering 2008, Paper No. 81, Dhaka, Bangladesh, December 30, 2008 - January 01, 2009.
  19. Rahman, M.M., Alim, M.A., Chowdhury, M.K. and Saha, S., Mixed convection in a vented cavity with heat conducting square block, Proceedings of International Conference on Chemical Engineering 2008, Paper No. 75, Dhaka, Bangladesh, December 30, 2008 - January 01, 2009.
  20. Saha, S., Saha, B.B. and Koyama, S., Aiding and opposing mechanisms of double diffusive mixed convection in a two-sided lid-driven square cavity, Proceedings of 4th BSME-ASME International Conference on Thermal Engineering, Paper No. 150, Dhaka, Bangladesh, December 27 - 29, 2008.
  21. Saha, S., Chakraborty, A., Saha, B.B. and Koyama, S., Performance study of adsorption characteristics of silica gel-water and activated carbon-n-butane systems, Proceedings of 4th BSME-ASME International Conference on Thermal Engineering, Paper No. 149, Dhaka, Bangladesh, December 27 - 29, 2008.
  22. Sultana, T., Saha, G. and Saha, S., Effect of thermal radiation on convective flow past a uniformly heated vertical plate in the presence of magnetic field, Proceedings of 4th BSME-ASME International Conference on Thermal Engineering, Paper No. 27, Dhaka, Bangladesh, December 27 - 29, 2008.
  23. Rahman, M.M., Alim, M.A., Saha, S. and Chowdhury, M.K., Effect of a centered heat conducting square body size on mixed convection in a vented cavity, Proceedings of 4th BSME-ASME International Conference on Thermal Engineering, Paper No. 103, Dhaka, Bangladesh, December 27 - 29, 2008.
  24. Hasan, N., Saha, S. and Feroz, C. M., Natural convection within an enclosure of sinusoidal corrugated top surface, Proceedings of 4th BSME-ASME International Conference on Thermal Engineering, Paper No. 117, Dhaka, Bangladesh, December 27 - 29, 2008.
  25. Saha, S., Saha, G. and Saha, B. B., Mixed convection around an adiabatic cylinder placed inside an inclined lid-driven enclosure, Proceedings of the 7th JSME-KSME Thermal and Fluids Engineering Conference, Paper No. A125, Chuo-ku Sapporo, Japan, October 13-16, 2008.
  26. Saha, S. and Saha, B. B., Numerical simulation on double diffusive mixed convection inside a vented square cavity, Proceedings of the Second International Forum on Heat Transfer, Abstract No. 153, Tokyo, Japan, September 17-19, 2008.
  27. Islam, A. K. M. S., Saha, G., Saha, S. and Islam, M. Q., Effect of inclination angle on mixed convection in a lid-driven enclosure with internal heat generation, Proceedings of the 12th Asian Congress of Fluid Mechanics, Paper No. 12acfm-128, Daejeon, Korea, August 18-21, 2008.
  28. Saha, S. and Ali, A. R. M., Thermal postbuckling analysis of transversely heated slender beams with both ends pinned and fixed, Proceedings of the International Conference on Mechanical and Manufacturing Engineering 2008, Paper No. ME_0344, Johor, Malaysia, May 21-23, 2008.
  29. Saha, G., Saha, S., Maleque, M. A., Chowdhury, M. M. K. and Islam, M. Q., Mixed convection inside a lid-driven parallelogram cavity with isoflux heating from below, Proceedings of the 12th Annual Paper Meet, Paper No. 192, IEB, Dhaka, Bangladesh, February 8-9, 2008.
  30. Uddin, H., Saha, S. and Hasan, M. N., Natural convection flows in a trapezoidal enclosure with isoflux heating from below, Proceedings of the 12th Annual Paper Meet, Paper No. 182-EN08, IEB, Dhaka, Bangladesh, February 8-9, 2008.
  31. Sultana, T., Saha, S. and Saha, G., Effect of corrugation geometry on natural convection inside a discretely heated enclosure, Proceedings of the 12th Annual Paper Meet, Paper No. 179-NM09, IEB, Dhaka, Bangladesh, February 8-9, 2008.
  32. Saha, S. and Ali, A. R. M., Thermal post buckling characteristics of slender elastic rods with general boundary conditions, Proceedings of the 12th Annual Paper Meet, Paper No. 165-NM07, IEB, Dhaka, Bangladesh, February 8-9, 2008.
  33. Saha, S. and Ali, A. R. M., Thermal postbuckling of slender extensible pinned-fixed bar under non-uniform heating, Proceedings of 7th International Conference on Mechanical Engineering, Paper No. ICME2007-AM-71, BUET, Dhaka, Bangladesh, December 29-31, 2007.
  34. Afroz, F., Saha, S., Islaam, A., & Feroz, C. M., Experimental and computational analysis of natural convection over a flat plate at different angle position with constant flux heating, Proceedings of the 29th International Thermal Conductivity Conference and the 17th International Thermal Expansion Symposium, Birmingham, Alabama, USA, June 24-27, 2007, pp. 474-483.
  35. Islam, M. T., Saha, S., Ali, M. and Islam, M. Q., Numerical analysis of mixed convection in a channel with an open enclosure for discrete bottom heating, Proceedings of the 11th Annual Paper Meet, Paper No. TF17, IEB, Dhaka, Bangladesh, December 25-26, 2006.
  36. Rahman, M. M., Saha, S., Alim, M. A. and Mamun, M. A. H., Effects of duct velocity profile and entry length for mixed convection in a horizontal channel with an open cavity, Proceedings of the 11th Annual Paper Meet, Paper No. TF01, IEB, Dhaka, Bangladesh, December 25-26, 2006.
  37. Islam, M. T., Saha, S., Mamun, M. A. H. and Feroz, C. M., Computational analysis of mixed convection heat transfer in a ventilated enclosure, Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, Paper No. BA-178, Dhaka, Bangladesh, December 20 - 22, 2006.
  38. Saha, S., Ali, M., Mamun, M. A. H. and Islam, M. Q., Effect of corrugation frequency on mixed convection in a vented enclosure of vee-corrugated vertical walls, Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, Paper No. BA-132, Dhaka, Bangladesh, December 20 - 22, 2006.
  39. Ali, M., Islam, S., Islam, M. Q. and Saha, S., Physics of hydrogen mixing with air behind finite thickness base, Proceedings of the International Conference on Fluid and Thermal Energy Conversion 2006, Paper No. 101, Jakarta, Indonesia, December 10 - 14, 2006.
  40. Saha, S., Rahman, M. M., Alim, M. A., Mamun, M. A. H. and Islam, A. K. M. S., Opposing mixed convection in a vented enclosure: effects of inlet port location and Prandtl number, Proceedings of the International Conference on Fluid and Thermal Energy Conversion 2006, Paper No. 190, Jakarta, Indonesia, December 10 - 14, 2006.
  41. Saha, S. and Ali, M., Finite element analysis of mixed convection in an open cavity heated from below, Proceedings of the International Conference on Fluid and Thermal Energy Conversion 2006, Paper No. 111, Jakarta, Indonesia, December 10 - 14, 2006.
  42. Islam, M. Q., Hasan, M. N. and Saha, S., Experimental investigation of aerodynamics characteristics of two, three and four bladed s-shaped stationary savonius rotors, Proceedings of 6th International Conference on Mechanical Engineering, Paper No. ICME05-FL-23, BUET, Dhaka, Bangladesh, December 28-30, 2005.

 List of Books

  1. Mandal A.C., Islam M.Q., Saha S., Sarker M.A.R., Heat Transfer Laboratory Practice, Bangladesh University of Engineering and Technology, Dhaka, 2010.

 Thesis

PhD Engg. Thesis: Numerical Analysis of Turbulent Heat Transfer in Pipe and Channel Flows, Dept. of Mechanical engineering, University of Melbourne, VIC, Australia, June 2014.

M. Sc. Engg. Thesis: Post Buckling Analysis of a Slender Bar under Transversely Non-Uniform Temperature Rise, Dept. of Mechanical engineering, BUET, Dhaka, Bangladesh, November 2007.

B.Sc. Engg. Thesis: Finite Element Analysis in One- and Two-Dimensional Conduction Heat Transfer, Dept. of Mechanical engineering, BUET, Dhaka, Bangladesh, November 2004.

 Professional

 Awards /

 Honours

 Received

International Postgraduate Research Scholarship (IPRS) [March, 2009- December, 2013] by the Australian federal government for full tuition and health cover fee during PhD study in University of Melbourne, Australia.

Melbourne International Research Scholarship (MIRS) [March, 2009- June, 2013] by the University of Melbourne for living and thesis allowance during PhD study in University of Melbourne, Australia.

RHD Studentship [June, 2013] by University of Melbourne for financial support during PhD study in University of Melbourne, Australia.

Housing Grant [2012] by Student Financial Aid, University of Melbourne for financial support during PhD study in University of Melbourne, Australia.

Graduate Grant [2010-11] by Student Financial Aid, University of Melbourne for financial support during PhD study in University of Melbourne, Australia.

The Barrett Trust [2010] by Student Financial Aid, University of Melbourne for financial support during PhD study in University of Melbourne, Australia.

Stawell Scholarship [2010] by The Melbourne School of Engineering, University of Melbourne for travelling overseas conference during PhD study in University of Melbourne, Australia.

Monbukagakusho Scholarship [2008] by Japanese Government for PhD study in Kyushu University, Japan (offer rejected).

University Merit Scholarship [1998-2002] by Bangladesh University of Engineering and Technology (BUET), Bangladesh for all eight semesters in B. Sc. Engineering in BUET, Bangladesh.

Deans List Scholarship [1999-2002] by Bangladesh University of Engineering and Technology (BUET), Bangladesh for 2nd, 3rd & 4th Academic Years in B. Sc. Engineering in BUET, Bangladesh.

Board (Dhaka) Scholarship [1998-2002] by Bangladesh Government for all four Academic Years in B. Sc. Engineering in BUET, Bangladesh.

 Professional

 Work at

 National and

 International

 Levels

Reviewer: Mathematical and Computer Modelling; Computers and Mathematics with Application; International Journal of Heat and Fluid Flow (Elsevier).

Reviewer: International Journal of Engineering (IJE), Indian Journal of Mathematics (IJM), Bulletin of the Allahabad Mathematical Society (BAMS), Journal of Naval Architecture and Marine Engineering (JNAME), Scientific Research and Essays.

Reviewer: Proceedings of the 7th International Conference on Mechanical Engineering, 29-31 December, 2007, BUET, Dhaka, Bangladesh.

Supervised the Project PC Interfaced Temperature Measurement and Controlling, under the Marine Engineering Specialization Course training program, Organized by the Department of Mechanical Engineering, BUET, Dhaka, September, 2005.

 Membership of

 Professional

 Institutions

Ex-Member of Bangladesh Society of Mechanical Engineers, Membership No. M 05 004 ME

Ex-Member of Institute of Engineers, Bangladesh, Membership No. M 21736

Life Member of Bangladesh Solar Energy Society, Membership No. L 86

Ex-Member of Bangladesh University of Engineering and Technology Alumni Association, Membership No. 20040514062M

 Contact Address

Department of Mechanical Engineering

Bangladesh University of Engineering & Technology (BUET)

Dhaka 1000

Bangladesh

 Email

sumonsaha@me.buet.ac.bd, sumonmebuet@gmail.com

 Telephone

+88-02-9665636, 9665650 ext: 6037(Off), +880-2-7442816 (Res.), +880-1926197002 (Mobile)

 Fax

+88-02-8613046, 8613026

 

| INDEX |    | INTRODUCTION |    | FACULTY MEMBERS |    | PUBLICATION |    | FACILITIES |    | RESEARCH |


Sumon Saha, Department of Mechanical Engineering, BUET, 2014